Home Categories Send inquiry

AEC2392a-BS/BM Gas Controller

Technical Specifications

Item  

Data

Configuration

One master control card, seven channel cards and one wall-mounted casing(AEC2392a-BS)

One master control card, fifteen channel cards and one wall-mounted casing(AEC2392a-BM)

Boundary dimension of the rack

Wall-mounted casing (length × width x height: 426mm×392mm×117mm) (AEC2392a-BS)

Wall-mounted casing (length × width x height: 430mm×565mm×145mm) (AEC2392a-BM)

Item

Master control card

Channel card

Operating power supply

DC24V±6V

Types of gas detected

%LEL/%VOL/ppm

Range

(0~100)%LEL, (0~100)%VOL, (0~9999)ppm

Value indication error

±5%FS

Operating mode

Connected to channel cards or working independently

Connected to the master control card or working independently

Capacity

8(16), to connect seven channel cards; the master control card can connect one set of 4-20mA standard current signal

One channel card connects one 4-20mA transmitter

Power consumption

3W

1W/channel card

Input signals

Connect to (4~20)mA standard current signals or passive switching value signals locally or via a channel card

4~20mA standard current signals or passive switching value signals

Output signals

1. RS485 bus communication signal (standard MODBUS protocol);2. Signals of 3 sets of relays (relays 1, 2 and 3); contact capacity: AC250V/10A or DC30V/10A. One channel card can output:Signals of 3 sets of relays (high alarm, low alarm and failure); contact capacity: AC250V/10A or DC30V/10A

Environmental condition for operating

Temperature: 0℃~+40℃; relative humidity: ≤93%; atmospheric pressure: 86kPa~106kPa

Alarming mode

Audible alarm and LED visual alarm

LED visual alarm

Display mode

OLCD Chinese display

LCD segment code display

Switch power supply

AC176V~AC264V (50Hz±0.5Hz); under voltage test point 170V±10V; main power supply’s max. working current: 1A

External standby power supply

DC12V /4Ah×2 lead-acid battery (AEC2392a-BS)

DC12V /7Ah×2 lead-acid battery (AEC2392a-BM)

Mounting mode

Wall-mounted

Note: The default system input signals are (4~20)mA standard signals; when the input signal is a passive switching value signal, the default signal is a passive normally-open signal; if a user requires that the default signal should be a passive normally-close signal under such case, please specify when ordering.

Major Features

● Three-wire system signal transmission; wall-mounted casing; anti-RFI/EMI interference;

● This product has a beautiful appearance and a portable size, several devices can be wall-mounted together;

● The master control card and channel cards are set separately but have a function of synchronous display. With a large LCD Chinese display screen, the master control card can realize Chinese menu operation as well as faster and easier display and operation;

● The master control card and channel cards are set separately but have a function of synchronous display. With a large LCD Chinese display screen, the master control card can realize Chinese menu operation as well as faster and easier display and operation;

● Channel cards’ multiple output types are applicable to linkage of on-site external control devices. By using standard MODBUS communication protocol, RS485 communication function can communicate with the host computer (e.g. DCS/PLC/EDS/RTU, etc.);

● Channel cards can receive 4-20mA signal or switching value signal input and be connected with various devices, including combustible gas detectors, toxic and hazardous gas detectors, oxygen detectors, flame detectors, smoke/heat detectors and manual alarming buttons, etc;

● Save the latest 999 alarming records, 999 failure records and 100 startup/shutdown records for check, which will not be lost in case of power failure;

● Channel cards have a three-color backlight LCD, which can indicate normal, failure and alarming status clearly;

● The master control card integrates the functions of the power supply card and the one-circuit channel card. All channels can be equipped with a HART communication module, showing a strong function.

Control panel

The control panel contains the display interfaces and operating interfaces of the master control card and channel cards, including the display screen, the LED status indicator, the alarm buzzer (installed inside the master control card) and operating keys. The master control card has ten operating keys while a channel card has three ones (see the following diagram):

Mounting

● Make 4 or 6 mounting holes (hole depth: ≥40mm) in a wall according to the requirements for the size among mounting holes (hole symbols 1 – 6) for mounting the hanging plate;

● Insert a plastic expansion bolt into each mounting hole;

● Fix the hanging plate onto the wall and fasten it onto the expansion bolts with 4 or 6 self-tapping screws (ST4.2×25);

● Hang the hanging parts at the bottom of the controller onto location A at the bottom board to complete mounting of the controller.

External interface

The master control card connects 9 circuits of channel cards. Each channel card collects 4-20mA multi-line or passive switching value signal output communication equipment, such as GT-AEC2232bX, GQ-AEC2232bX, GT-AEC2232aT, AEC2338, GQ-AEC2232bX-P, AEC2338-D detectors and flame detectors. It can also connect other 4-20mA output transmitters. Two sets of built-in modules of the master control card can realize remote linkage of external devices (on-site sound and light, solenoid valves and fans, etc.). External devices (e.g. on-site sound and light) can also be controlled through three sets of relay signal output terminals provided by each channel card. Remote communication with the host system can be done through the RS485 communication interface so that the host system can monitor AEC2392a-BS/AEC2392a-BM gas detection systems in several areas intensively.

Master control card:

485A and 485B: RS485 communication interface connection terminals

L, PG and N: AC220V power supply terminals

NC*(normally closed), COM* (common) and NO* (normally open): (3 sets) output terminals for relay external control signals output terminals

V+, SIN and GND:  input terminals for 4~20mA or passive switching value signals

Channel card:

NC*(normally closed), COM* (common) and NO* (normally open): (3 sets) output terminals for relay external control signals output terminals

24V, SIN and GND: input terminals for 4~20mA or passive switching value signals

When the signal connected is a passive switching value signal, the two ends of the signal are connected to 4~20mA (IN) and +24V. If DC24V power will be supplied to the equipment connected, the wiring is as shown in the system configuration diagram.

Internal terminal:

CAH, CAL, VSS and 24V: connection terminals for internal communication (connected in the factory)

Notes: (1) The maximum allowable wire diameter for connection terminals is 2.5mm2. (2)Factory default of the master control card’s relay output is passive switching value signal.


AEC2392a-BS/BM Gas Controller Related Video: